LEDLIGHT FLEX 12 8P
48 V 2000

  • up to 2.6 times higher in-feed length compared to 24 V DC
  • ideal for extra long light lines with only one power supply
  • excellent colour rendering: CRI Ra typ. 94, R9 > 50
  • good efficiency: up to 125 lm/W at 4000 K
  • operating life L90/B10 > 60,000 h at Tc < 80 °C
  • current regulation by IC for constant brightness over the entire light line with integrated overheating protection
  • with reverse polarity protection diode
  • with TVS surge protection diode
  • with high-quality 3M double adhesive tape


  • Number LED: 7
  • Input voltage: 48 VDC
  • Channels: 1
  • Min. bend radius: 20 mm


System Colour type LED/meter Pitch Roll length Max. feed Cut length Connection type Connection type Beam angle Dimmable Application Colour consistency Binning Max. housing temperature Degree of protection
 
ANrColourColour
temperature
Lumen/
watt
Lumen/
meter
CRIEEC**Watt/
meter
DatasheetsColour
rendering
CUT à 9 cm
50012328 warm white | 9272700 K124 lm/W2180 lm/m94E17,6 W/m
50012333 white | 9303000 K117 lm/W2061 lm/m94F17,6 W/m
50012334 cold white | 9404000 K125 lm/W2189 lm/m94E17,6 W/m
REEL à 1008 cm
50412328 warm white | 9272700 K124 lm/W2180 lm/m94E17,6 W/m
50412333 white | 9303000 K117 lm/W2061 lm/m94F17,6 W/m
50412334 cold white | 9404000 K125 lm/W2189 lm/m94E17,6 W/m

** The EEC specification refers in each case to the installed light source(s)

Please note: Insufficient cooling will damage the LEDs

Maximum LED Strips length in relation to supply line length »

Technical Drawing

Profile use with visible light points

Profile use with homogeneous lighting

* = a uniform light line is only possible in combination with a high diffusor
** = a uniform light line is only possible in combination with a half-round diffusor
*** = a uniform light line is only possible in combination with a square diffusor