LEDLIGHT FLEX 25 8P
RGB

  • LED chips with efficient heat management and good light yield
  • delivers luminous flux up to 360 lm/m
  • tool-free connection possible with plug connectors
  • individual setting of colours through the straightforward regulation via com+ (we recommend our CHROMOFLEX series)
  • with current limiter incl. temperature control, high amount of copper in FPC and 3M thermoconducting adhesive tape
  • estimated lifetime L70 at Tc < 45 °C: > 30,000 h


  • Input voltage: 24 VDC
  • Colour: RGB
  • Channels: 3


System Colour type LED/meter Pitch Roll length Cut length Connection type Connection type Beam angle Dimmable Lifespan L70 Max. housing temperature Degree of protection
 
ANrColour
temperature
Lumen/
watt
Lumen/
meter
Number
LED
Min. bend
radius
Watt/
meter
Max.
feed
Datasheets
CUT à 15 cm
50015531 RGB46 lm/W440 lm/m6209,6 W/m855 cm
REEL à 600 cm
50602531 RGB46 lm/W440 lm/m24020 mm9,6 W/m700 cm
Please note: Insufficient cooling will damage the LEDs
ANrDescriptionApplicationHousing/
colour
Datasheets
50990741 Cable (Outdoors), cable 100 cm, 4 pole, with tin-plated free wire ends - soldered to LEDlight flexIndoorwhite 
50990742 Cable (Outdoors), cable 100 cm, 4 pole, with tin-plated free wire ends - soldered to LEDlight flexIndoorwhite 
50990743 Cable (Outdoors), cable 100 cm, 4 pole, with tin-plated free wire ends - soldered to LEDlight flexIndoorwhite 
66100023 Cable (Outdoors), RGB cable round, white, for outdoor use, PUR, 3 x 0.34mm? / 1x 0.5mm²Outdoorwhite similar RAL 9010 frosted
66100223 Cable (Outdoors), RGB cable round, white, for outdoor use, PUR, 3 x 0.34mm? / 1x 0.5mm²Outdoorblack RAL 9005
50990408 LED cable and confectioning, cable 4 pole with AMP male connector 100 cm - soldered to LEDlight flex   
50990021 LED cable and confectioning, one-sided skinning and tinning/soldering to LEDlight flex, 4-pole (additionally cable) - RGB, boundless wire ends   
50990207 LED cable and confectioning, two-sided skinning and tinning/soldering to LEDlight flex, 4-pole (additionally cable) - RGB   

Maximum LED Strips length in relation to supply line length »

Technical Drawing

Profile use with visible light points

Profile use with homogeneous lighting

* = a uniform light line is only possible in combination with a high diffusor
** = a uniform light line is only possible in combination with a half-round diffusor
*** = a uniform light line is only possible in combination with a square diffusor