LEDLIGHT FLEX 15 8P
RGB

  • LED chips with efficient heat management and good light yield
  • delivers luminous flux up to 740 lm/m
  • connection with tool-free plug connector
  • individual setting of colours through the straightforward regulation via com+ (we recommend our CHROMOFLEX series)
  • with current limiter incl. temperature control, high amount of copper in FPC and 3M thermoconducting adhesive tape
  • estimated lifetime L70 at Tc < 45 °C: > 30,000 h


  • Input voltage: 24 VDC
  • Colour: RGB
  • Channels: 3
  • Min. bend radius: 20


System Colour type LED/meter Pitch Max. feed Cut length Connection type Connection type Beam angle Dimmable Lifespan L70 Max. housing temperature Degree of protection
 
ANrColour
temperature
Lumen/
watt
Lumen/
meter
Number
LED
Watt/
meter
Datasheets
CUT à 9 cm
50001531 RGB46 lm/W740 lm/m616 W/m
REEL à 396 cm
50324631 RGB46 lm/W740 lm/m26416 W/m
Please note: Insufficient cooling will damage the LEDs
ANrDescriptionApplicationHousing/
colour
Datasheets
50990741 Cable (Outdoors), cable 100 cm, 4 pole, with tin-plated free wire ends - soldered to LEDlight flexIndoorwhite 
50990742 Cable (Outdoors), cable 100 cm, 4 pole, with tin-plated free wire ends - soldered to LEDlight flexIndoorwhite 
50990743 Cable (Outdoors), cable 100 cm, 4 pole, with tin-plated free wire ends - soldered to LEDlight flexIndoorwhite 
66100023 Cable (Outdoors), RGB cable round, white, for outdoor use, PUR, 3 x 0.34mm? / 1x 0.5mm²Outdoorwhite similar RAL 9010 frosted
66100223 Cable (Outdoors), RGB cable round, white, for outdoor use, PUR, 3 x 0.34mm? / 1x 0.5mm²Outdoorblack RAL 9005
50990408 LED cable and confectioning, cable 4 pole with AMP male connector 100 cm - soldered to LEDlight flex   
50990021 LED cable and confectioning, one-sided skinning and tinning/soldering to LEDlight flex, 4-pole (additionally cable) - RGB, boundless wire ends   
50990207 LED cable and confectioning, two-sided skinning and tinning/soldering to LEDlight flex, 4-pole (additionally cable) - RGB   

Maximum LED Strips length in relation to supply line length »

Technical Drawing

Profile use with visible light points

Profile use with homogeneous lighting

* = a uniform light line is only possible in combination with a high diffusor
** = a uniform light line is only possible in combination with a half-round diffusor
*** = a uniform light line is only possible in combination with a square diffusor