LEDLIGHT FLEX 08 8
VIBRANT 2000

  • LED strips with brilliant colour rendering: CRI typ. 98
  • reproduces almost the entire light spectrum of the sun
  • enables lifelike light simulations
  • good efficiency: up to 123 lm/W at 4000 K
  • high luminous flux up to 2,368 lm/m possible
  • long light lines with only one feed through double layer FPC possible
  • very long operating life L90/B10 > 60,000 h at Tc < 80 °C
  • current regulation by IC for constant brightness over the entire light line with integrated overheating protection
  • with reverse polarity protection diode
  • with TVS surge protection diode
  • with high-quality 3M double adhesive tape


  • Input voltage: 24 VDC
  • Channels: 1
  • Min. bend radius: 20 mm


System Colour type LED/meter Pitch Roll length Max. feed Cut length Connection type Beam angle Dimmable Application Colour consistency Binning Max. housing temperature Degree of protection
 
ANrColourColour
temperature
Lumen/
watt
Lumen/
meter
CRIEEC**Number
LED
Watt/
meter
DatasheetsColour
rendering
CUT à 6 cm
50012628 warm white | 9272700 K106 lm/W2026 lm/m98F719,2 W/m
50012633 white | 9303000 K114 lm/W2177 lm/m98F719,2 W/m
50012634 cold white | 9404000 K123 lm/W2368 lm/m98E719,2 W/m
REEL à 504 cm
50412628 warm white | 9272700 K106 lm/W2026 lm/m98F58819,2 W/m
50412633 white | 9303000 K114 lm/W2177 lm/m98F58819,2 W/m
50412634 cold white | 9404000 K123 lm/W2368 lm/m98E58819,2 W/m

** The EEC specification refers in each case to the installed light source(s)

Please note: Insufficient cooling will damage the LEDs

Maximum LED Strips length in relation to supply line length »

Technical Drawing

Profile use with visible light points

Profile use with homogeneous lighting

* = a uniform light line is only possible in combination with a high diffusor
** = a uniform light line is only possible in combination with a half-round diffusor
*** = a uniform light line is only possible in combination with a square diffusor